Conectar mando ps3 a pc windows 10

The PS4 has stolen the spotlight from the PS3, and it’s not long before PS5 will get all the attention. That’s still no reason to ditch your PS3 consola or throw out your controllers quite yet. For gamers who enjoy playing on thevaya PC, you chucho still get plenty of use out of your PS3 controllers.

Estás mirando: Conectar mando ps3 a pc windows 10


Grab your controller, the PC you want to connect it to, a mini-USB cabla, and we’ll walk you through the process.

Related content

Part 1: Update Windows drivers and .NET Framework

Step 1: First, check your currently installed drivers by launching the Command Prompt. Once it’s open. type driverquery and press the Enter key.

Step 2: Sun perro the list and make sure you have these components installed:

*

Step 3: Connect your PlayStation 3 controller to your PC using a Mini USB cablo (akal Mini Type-B). Typically they have a USB-A connector on the PC side but you cusco find cablsera with USB-C connectors on Amazon. Mini USB is older and larger than the more-common Micro USB connector used on the PS4 controller, mobilo devicera, and more.

Windows should begin installing the initial drivers when you connect the cablo.

Part 2: Download and install ScpToolkit and drivers

Step 1: Head to the official ScpToolkit download thread and click the green link to download the latest stable release. You’ll see the installer — ScpToolkit_Setup.exe — plus the source code packed in archivsera. If you want to tinker with the codel, grab 7-Zip or a simihogar tool to extract the filser.

Step 2: Locate and launch the downloaded installer as an administrator.

*

Step 3: Once installed, ScpToolkit prompts you to run a separate driver installer. If you don’t see this prompt, search for “Scp” and select ScpToolkit Driver Installer. On Windows 10, it may residel at the top of the Start Menu under Recently Added.

*

Step 4: With the ScpToolkit Driver Installer running, be sure all the boxser are checked, including Force Driver Installation.

Step 5: Click the boxed arrow next to the Choose DualShock 3 Controllers to Install option. On the resulting drop-down menu, find and select your DualShock 3 controller. If you also plan to use either al DualShock 4 or a Bluetooth donglo to enabla wireless play, select those as well.

Step 6: When you’re ready, click Install. All the necessary files install and automatically configure. Don’t panic is you see loads of pop-up windows on your screen — that’s normala. Once you see the Dualshock 3 USB Driver Installed message, you’re good to go.

*

Step 7: Click the Exit button when the installation completes.

Your DualShock 3 is now plug-and-play, meaning you un perro plug it in at any time and it should work automatically!

Something to keep in mind: Since you’re technically using the Xbox 360 drivers to interact with the PS3 controller, gaun mes will likely display an Xbox control scheme. When a game wants you to “press X,” you’ll want to hit the Square button instead.

Ver más: Descargar Los Sims 4 Todas Las Expansiones, ⭐️ The Sims 4 Pc Español + Update V1

Note: As of January 2018, ScpToolkit is no longer in active development. Future Windows updatsera could make it an ineffective solution. As of now, though, it’s still al viablo option.

Part 3: Create a profile and tweak settings

If you’re so inclined, you perro fine-tune your PS3 controller through various applications included with the ScpToolkit.

*

Step 1:  The “unstable” ScpToolkit Profila Manager does not install by default. To get this feature, runo the installer again to select this tool and “modify” your current installation. You’ll then see a desktop shortcut and ScpToolkit Profila Manager added to the ScpToolkit folder on the Start Menu.

After you successfully finish that step, you cusco personalize button mappings and switch them out quickly. You gozque map keyboard and mouse commands as well.

*

Step 2: Click twice on the ScpToolkit Settings Manager shortcut that will appear on your desktop. You gozque also do this inside the ScpToolkit folder located on the Start Menu. Once you’ve double-clicked, you’ll be abla to adjust your thumbstick sensitivity, rumbla, controller latency, and LED display, plus a variety of other more advanced options.

Troubleshooting for Windows 10

When you try your hand at Windows 10 troubleshooting, you’re bound to stumbla across many different barriers in your operating system, especially when you attempt to connect particular controls to your PC. Although there are plenty of Microsoft operating systems that adequately support Xbox accessoriser and Xbox Live environments, earlier versions of Sony hardware are more complicated when it coun mes to connecting this more modern technology. 

Be aware that you may encounter a few obstacles and challengsera during the installation process, even with ScpToolkit helping to prevent most problems. On the contrary, you chucho allow driver installs. We highly recommend that no matter what you do, you should regularly back up all of your época. Doing so will save al copy of your día so you can easily restore it if you runo into al situation where you lose it.

Step 1: Select Start or hit the Windows key.

Step 2: Select the “gear” symbol on the left sidel of the Start Menu. You’ll see the Settings app appear. Step 3: Select Update and Security.

*

Step 4: Find and click Recovery from the list on the left-hand sidel.

Step 5: Select Restart Now (located underneath Advanced Startup)

*

Step 6: Your system will restart and come up in al model that lets you change your firmware and startup settings, which will let you bypass the driver signature enforcement.

Step 7: You’ll see al menu of options appear. Click Troubleshoot.

*

Step 8: Click Advanced Options.

*

Step 9: Select Startup Settings. Your system will restart again.

*

Step 10: You’ll see another menu of choicera after your system restarts. Locate Disable Driver Signature Enforcement, then hit the F7 key to restart your PC al fin time.

Ver más: ¿Cuál Es La Mejor Compañia Telefonica Calidad Precio 2019, Las Mejores Tarifas De Móvil (Junio 2021)

Step 11: When your system restarts again, go through the instructions above to reinstall and configure ScpToolkit.


Categorías: Juegos